Hydraulic Cylinder Repair for Suwanee, GA
About 19 miles (~30 min) from our Cumming shop · Average rebuild time 3–5 days
Call 678-807-7749 Request a Quote- Since 2017Experienced and knowledgeable repair technicians
- Nut Buster40,000 ft-lbs for high torque applications
- Machining & WeldingIn house machine shop services
- 5.0★49 Google reviews
Suwanee contractors, fleets and warehouses can count on North Georgia Cylinder & Hydraulic for fast, careful hydraulic cylinder rebuilds at our Cumming shop.
Getting to our shop from Suwanee
From Suwanee it's about 19 miles to our shop — roughly 30 minutes via Suwanee Dam Road, GA-20 and GA-400. We're open Monday–Friday, 8:00 AM–5:00 PM.
North Georgia Cylinder & Hydraulic, Inc.
4734 Hammond Industrial Drive, Cumming, GA 30041
Equipment we repair for Suwanee and Gwinnett County
Along I-85 and Peachtree Industrial, Suwanee businesses run loaders, hydraulic attachments, compactors, trucks and trailers, while contractors bring in excavator, skid steer and backhoe cylinders.
Seal failure is usually a symptom, not the cause. We check rods for scoring and straightness, barrels for pitting and roundness, and look at whether the seal extruded, wore with age or was attacked by the wrong fluid. Fixing the cause is what makes a rebuild last. When we're done, every rebuilt cylinder is reassembled and tested to make sure it functions properly before it goes back to you.
Why Suwanee customers choose NGCH
- A standard cylinder rebuild takes 3–5 days, and you can ask to expedite when a machine can't wait.
- Our in-house machine shop — manual lathes up to 21" x 80" with a 4.125" thru hole plus manual mills — means rods, pins, bushings and glands are made here, not outsourced.
- Every cylinder is resealed with high-performance aftermarket seals that meet or exceed OEM specifications.
- We've been rebuilding hydraulic cylinders since 2017, and customers rate us 5.0 stars on Google (43 reviews).
What should I check before reinstalling a rebuilt cylinder?
Make sure the original problem is corrected, the fluid is clean, filters are changed, relief valve pressures are set correctly and the machine itself is in good condition.
Get your cylinder back in service
Send photos of the cylinder and its tag through our contact form, or bring it to our Cumming shop for a teardown inspection — we'll tell you what failed and what it will take to fix it. Questions? Call 678-807-7749.
Visit the Shop
4734 Hammond Industrial Drive
Cumming, GA 30041
Business hours
Monday – Friday: 8:00AM – 5:00PM
Saturday: Closed
Sunday: Closed
Phone: 678-807-7749
Email: sales@northgacylinders.com